SWI-Prolog offers several ways to store data in globally accessible
memory, i.e., outside the Prolog stacks. Data stored this way
notably does not change on backtracking. Typically it is a bad
idea to use any of the predicates in this section for realising global
variables that can be assigned to. Typically, first consider
representing data processed by your program as terms passed around as
predicate arguments. If you need to reason over multiple solutions to a
goal, consider findall/3, aggregate/3
and related predicates.
Nevertheless, there are scenarios where storing data outside the
Prolog stacks is a good option. Below are the main options for storing
data:
- Using dynamic predicates
- Dynamic predicates are predicates for which the list of clauses is
modified at runtime using asserta/1, assertz/1, retract/1
or
retractall/1.
Following the ISO standard, predicates that are modified this way need
to be declared using the dynamic/1 directive.
These facilities are defined by the ISO standard and widely supported.
The mechanism is often considered slow in the literature. Performance
depends on the Prolog implementation. In SWI-Prolog, querying dynamic
predicates has the same performance as static ones. The manipulation
predicates are fast. Using retract/1
or retractall/1
on a predicate registers the predicate as‘dirty’. Dirty
predicates are cleaned by
garbage_collect_clauses/0,
which is normally automatically invoked. Some workloads may result in
significant performance reduction due to skipping retracted clauses
and/or clause garbage collection.
Dynamic predicates can be wrapped using library library(persistency)
to maintain a backup of the data on disk. Dynamic predicates come in two
flavours, shared between threads and local to each
thread. The latter version is created using the directive
thread_local/1.
- The recorded database
- The‘recorded database’registers a list of terms with a key,
an atom or compound term. The list is managed using recorda/3, recordz/3
and erase/1.
It is queried using recorded/3.
The recorded database is not part of the ISO standard but fairly widely
supported, notably in implementations building on the‘Edinburgh
tradition’. There are few reasons to use this database in
SWI-Prolog due to the good performance of dynamic predicates. Advantages
are (1) the handle provides a direct reference to a term, (2) cyclic
terms can be stored and (3) attributes (section
8.1) are preserved. Disadvantages are (1) the terms in a list
associated with a key are not indexed, (2) the poorly specified
immediate update semantics (see section
4.14.5 applies to the recorded database and (3) reduced portability.
- The flag/3
predicate
- The predicate flag/3
associates one simple value (number or atom) with a key (atom, integer
or compound). It is an old SWI-Prolog specific predicate that should be
considered deprecated, although there is no plan to remove it.
- Using global variables
- The predicates b_setval/2
and nb_setval/2
associate a term living on the Prolog stack with a name, either
backtrackable or non-backtrackable. Backtrackable and non-backtrackable
assignment without using a global name can be realised with setarg/3
and nb_setarg/3.
Notably the latter are used to realise aggregation as e.g., aggregate_all/3
performs.
- Tries
- As of version 7.3.21, SWI-Prolog provides tries (prefix trees)
to associate a term variant with a value. Tries have been
introduced to support tabling and are described in section
4.14.4.
- [ISO]abolish(:PredicateIndicator)
- Removes all clauses of a predicate with functor Functor and
arity
Arity from the database. All predicate attributes (dynamic,
multifile, index, etc.) are reset to their defaults. Abolishing an
imported predicate only removes the import link; the predicate will keep
its old definition in its definition module.
According to the ISO standard, abolish/1
can only be applied to dynamic procedures. This is odd, as for dealing
with dynamic procedures there is already retract/1
and retractall/1.
The abolish/1
predicate was introduced in DEC-10 Prolog precisely for dealing with
static procedures. In SWI-Prolog, abolish/1
works on static procedures, unless the Prolog flag iso
is set to true.
It is advised to use retractall/1
for erasing all clauses of a dynamic predicate.
- abolish(+Name,
+Arity)
- Same as
abolish(Name/Arity). The predicate abolish/2
conforms to the Edinburgh standard, while abolish/1
is ISO compliant.
- copy_predicate_clauses(:From,
:To)
- Copy all clauses of predicate From to To. The
predicate
To must be dynamic or undefined. If To is
undefined, it is created as a dynamic predicate holding a copy of the
clauses of
From. If To is a dynamic predicate, the clauses of
From are added (as in assertz/1)
to the clauses of To.
To and From must have the same arity. Acts as if
defined by the program below, but at a much better performance by
avoiding decompilation and compilation.
copy_predicate_clauses(From, To) :-
head(From, MF:FromHead),
head(To, MT:ToHead),
FromHead =.. [_|Args],
ToHead =.. [_|Args],
forall(clause(MF:FromHead, Body),
assertz(MT:ToHead, Body)).
head(From, M:Head) :-
strip_module(From, M, Name/Arity),
functor(Head, Name, Arity).
- redefine_system_predicate(+Head)
- This directive may be used both in module
user and in
normal modules to redefine any system predicate. If the system
definition is redefined in module user, the new definition
is the default definition for all sub-modules. Otherwise the
redefinition is local to the module. The system definition remains in
the module system.
Redefining system predicate facilitates the definition of
compatibility packages. Use in other contexts is discouraged.
- [ISO,nondet]retract(+Term)
- When Term is an atom or a term it is unified with the first
unifying fact or clause in the database. The fact or clause is removed
from the database. The retract/1
predicate respects the logical update view. This implies that retract/1
succeeds for all clauses that match Term when the predicate
was called. The example below illustrates that the first call
to retract/1
succeeds on
bee on backtracking despite the fact that bee
is already retracted.87Example by
Jan Burse
:- dynamic insect/1.
insect(ant).
insect(bee).
?- ( retract(insect(I)),
writeln(I),
retract(insect(bee)),
fail
; true
).
ant ;
bee.
If multiple threads start a retract on the same predicate at the same
time their notion of the entry generation is adjusted such that
they do not retract the same first clause. This implies that, if
multiple threads use once(retract(Term)), no two threads
will retract the same clause. Note that on backtracking over retract/1,
multiple threads may retract the same clause as both threads respect the
logical update view.
- [ISO,det]retractall(+Head)
- All facts or clauses in the database for which the head
unifies with Head are removed. If Head refers to a
predicate that is not defined, it is implicitly created as a dynamic
predicate. See also dynamic/1.88The
ISO standard only allows using dynamic/1
as a directive.
- [ISO]asserta(+Term)
- [ISO]assertz(+Term)
- [deprecated]assert(+Term)
- Assert a clause (fact or rule) into the database. The predicate
asserta/1
asserts the clause as first clause of the predicate while
assertz/1
assert the clause as last clause. The deprecated assert/1
is equivalent to assertz/1.
If the program space for the target module is limited (see set_module/1), asserta/1
can raise a
resource_error(program_space) exception. The example below
adds two facts and a rule. Note the double parentheses around the rule.
?- assertz(parent('Bob', 'Jane')).
?- assertz(female('Jane')).
?- assertz((mother(Child, Mother) :-
parent(Child, Mother),
female(Mother))).
- asserta(+Term,
-Reference)
- assertz(+Term,
-Reference)
- [deprecated]assert(+Term,
-Reference)
- Equivalent to asserta/1, assertz/1, assert/1,
but in addition unifies
Reference with a handle to the asserted clauses. The handle
can be used to access this clause with clause/3
and erase/1.
Traditionally,
Prolog database updates add or remove individual clauses. The Logical
Update View ensures that a goal that is started on a dynamic
predicate does not see modifications due to assert/1
or
retract/1
during its life time. See section
4.14.5. In a multi-threaded context this assumption still holds for
individual predicates: concurrent modifications to a dynamic predicate
are invisible.
Transactions allow running a goal in isolation. The
goals running inside the transaction‘see’the database as it
was when the transaction was started together with database changes done
by the transaction goal. Other threads see no changes until the
transaction is
committed. The commit, also if it involved multiple clauses
spread over multiple predicates, becomes atomically visible to
other threads. Transactions have several benefits
Wielemaker,
2013
- If a database update requires multiple assert/1
and/or retract/1
operations, a transaction ensure either all are executed or the database
remains unchanged. Notably unexpected exceptions or failures cannot
leave the database in an inconsistent state.
- Other threads do not see the intermediate inconsistent states when a
database update that consists of multiple assert and/or retract is
performed in a transaction. This notably avoids the need to use locks
(see with_mutex/2)
in threads that read the data. A reading thread may still need to use snapshot/1
if a goal depends on multiple calls to dynamic predicates. Unlike locks,
transaction and snapshot based synchronization allows both readers and
writers to make progress simultaneously.89Read-write
locks also provide readers and writers to make progress simultaneously,
but readers see all intermediate states rather than a consistent state.
Transactions on their own do not guarantee consistency. For
example, when running the code below to update the temperature
concurrently from multiple threads it is possible for the global state
to have multiple temperature/1 clauses.
update_temperature(Temp) :-
transaction(( retractall(temperature(_)),
asserta(temperature(Temp)))).
Global consistency can be achieved by wrapping the above
transaction using with_mutex/2
or by using transaction/3
with a
constraint that demands a single clause for temperature/1
- Transactions allow for “what if” reasoning over the
dynamic database. This is particularly useful when combined with the
deductive database facilities provided by tabling (see section
7).
SWI-Prolog transactions only affect the dynamic database.
Static predicates are globally visible and shared at all times. In
particular, transactions do not affect loading source files and thus,
source files loaded inside a transaction (e.g., due to autoloading)
are immediately globally visible. This may pose problems if loading
source files provide clauses for dynamic predicates.
- transaction(:Goal)
- transaction(:Goal,
+Options)
- Run Goal as once/1
in a transaction. This implies that access to dynamic predicates‘sees’the
dynamic predicates at the moment the transaction is started, together
with the modifications issued by
Goal. Thus, Goal does not see changes to dynamic
predicates from other threads and other threads do not see modifications
by
Goal (isolation). If Goal succeeds, all
modifications become atomically visible to the other threads.
If Goal fails or raises an exception all local modifications
are discarded and transaction/1
fails or passes the exception.
Currently the number of database changes inside a transaction (or
snapshot, see snapshot/1)
is limited to 2 ** 32 -1. If this limit is exceeded a representation_error(transaction_generations)
exception is raised.
Transactions may be nested. The above mentioned limitation for the
number of database changes applies to the combined number in nested
transactions.
If Goal succeeds, the transaction is committed.
This implies that (1) any clause that is asserted in the transaction and
not retracted in the same transaction is made globally visible
and (2) and clause the existed before the transaction and is retracted
in the transaction becomes globally invisible. Multiple
transactions may retract the same clause and be committed, i.e.,
committing a retract that was already performed is a no-op. All
modifications become
atomically visible to other threads. The transaction/3
variation allows for verifying constraints just before the
commit takes place.
Clause ordering Inside a transaction clauses can be added
using asserta/1
and assertz/1.
If only a single transaction is active at any point in time transactions
preserve the usual ordering of clauses. However, if multiple
transactions manipulate the same predicate(s) concurrently (typically
using transaction/3),
the final order of the clauses is the order in which the transactions
asserted the clauses and
not the order in which the transactions are committed.
The transaction/1
variant is equivalent to transaction(Goal,[]). The transaction/2
variant processed the following options:
- bulk(+Boolean)
- When
true, accumulate events from changes to dynamic
predicates (see prolog_listen/2)
and trigger these events as part of the commit phase. This implies that
if the transaction is not committed the events are never triggered.
Failure to trigger the events causes the transaction to be discarded.
Experimental.
- transaction(:Goal,
:Constraint, +Mutex)
- Similar to transaction/1,
but allows verifying Constraint during the commit phase. This
predicate follows the steps below. Any failure or exception during this
process discards the transaction and releases
Mutex when applicable. Constraint may modify the
database. Such modifications follow the semantics that apply for Goal.
- Call
once(Goal)
- Lock Mutex
- Change the visibility to the current global state combined
with the changes made by Goal
- Call
once(Constraint)
- Commit the changes
- Unlock Mutex.
This predicate is intended to execute multiple transactions with a
time consuming Goal in part concurrently. For example, it can
be used for a Compare And Swap (CAS) like design. We illustrate
this using a simple counter in the code below. Note that the transaction
fails if some other thread concurrently updated the counter. This is why
we need the repeat/0
and a final !/0. The
CAS-style update is in general useful if Goal is expensive
and conflicts are rare.
:- dynamic counter/1.
increment_counter(Delta) :-
repeat,
transaction(( counter(Value),
Value2 is Value+Delta,
),
( retract(counter(Value)),
asserta(counter(Value2))
),
counter_lock),
!.
- snapshot(:Goal)
- Similar to transaction/1,
but always discards the local modifications. In other words, snapshot/1
allows a thread to examine a frozen state of the dynamic predicates
and/or make isolated modifications without affecting other threads and
without making permanent changes to the database. Where transactions
allow the global state to be updated atomically from one consistent
state to the next, a snapshot allows reasoning about a consistent state.
- [nondet]current_transaction(-Goal)
- True when called inside a transaction running Goal. This
predicate generates candidates from the current (nested) transaction
outward.
Goal is a plain goal if the calling context module is the
same as matching transaction/1
or snapshot/1
and a qualified callable term otherwise. Note that this only enumerates
transactions in the current thread.
- transaction_updates(-Updates)
- Unify Updates with a list of database updates that would be
effectuated if the transaction is going to be committed at this stage.
Updates is a list of terms defined below. The elements are
sorted on the change generation, i.e., the order in which the operations
were performed.
- asserta(+ClauseRef)
- assertz(+ClauseRef)
- The given clause will be asserted at the start or end. Note that due to
competing transactions the clause may no longer be the first/last clause
of the predicate.
- erased(+ClauseRef)
- The given clause will be removed. This may be due to erase/1,
retract/1
or retractall/1.
Transactions interact with other facilities that depend on changing
dynamic predicates. This section discusses these interactions.
- Last modified generation
- Using the predicate_property/2
property
last_modified_generation(Generation) we can determine
whether a predicate was modified. When a predicate is changed inside a
transaction this generation is not updated. The generation for dynamic
predicates that are modified in the transaction is updated to the commit
generation when the transaction is committed. Asking for the last
modified generation inside the transaction examines the log of
modified clauses and reports the generation as one of
- The global modified generation if the predicate was not modified in
the transaction and not modified outside the transaction to beyond the
start generation of the transaction. If the modified generation is
higher than the transaction start generation, this generation is
reported.
bugNote that the above implies
that inside a transaction we observe a changing last modified generation
for predicates that have only been modified outside the transaction
while these changes are not visible.
- The transaction start generation plus the local generation of the
last change if the predicate is modified inside the transaction.
- Wait for database changes
- The predicate thread_wait/2
does not wakeup threads for changes inside a transaction. The wakeup is
delayed until the transaction is committed. Note that thread_wait/2
cannot be meaningfully called from inside a transaction because no
external entities can cause changes to the dynamic database inside the
transaction.
- Incremental tabling
- Consistency of tables must be restored if the transaction is rolled
back. For local tables this is realised as follows:
- Tables are either marked to be invalidated on rollback or,
for monotonic tabling individual answers are marked to be
removed on rollback.
- A table is marked to be invalidated if, while it is created
or reevaluated, at least one dependent dynamic predicate has been
modified inside the transaction.
- Answers are marked to be retracted when they result from monotonic
reevaluation based on changes inside the transaction.
In other words: tables being reevaluated inside a transaction that do
not depend on predicates modified inside the transaction remain valid.
Monotonic tables that get new answers due to asserts inside the
transaction have these answers removed during the rollback while the
table remains valid. Monotonic tables that are for some reason
invalidated inside the transaction are invalidated during the rollback.
Correct interaction between tabling and transaction currently
only deals with local tables. Shared tables should not
be combined with transactions. Future versions may improve on that. A
possible route is to make a local copy from a shared table when
(re)evaluation is performed inside a transaction.
Status SWI-Prolog transaction basics and API are stable.
Interaction with other parts of the system that depend on dynamic
predicates is still unsettled. Future versions may support
non-determinism through transactions and snapshots.
- recorda(+Key,
+Term, -Reference)
- Assert Term in the recorded database under key Key.
Key is a small integer (range min_tagged_integer
...max_tagged_integer,
atom or compound term. If the key is a compound term, only the name and
arity define the key.
Reference is unified with an opaque handle to the record (see
erase/1).
- recorda(+Key,
+Term)
- Equivalent to
recorda(Key, Term, _).
- recordz(+Key,
+Term, -Reference)
- Equivalent to recorda/3,
but puts the Term at the tail of the terms recorded under Key.
- recordz(+Key,
+Term)
- Equivalent to
recordz(Key, Term, _).
- recorded(?Key,
?Value, ?Reference)
- True if Value is recorded under Key and has the
given database Reference. If Reference is given,
this predicate is semi-deterministic. Otherwise, it must be considered
non-deterministic. If neither Reference nor Key is
given, the triples are generated as in the code snippet below.90Note
that, without a given Key, some implementations return
triples in the order defined by recorda/2
and recordz/2.
See also current_key/1.
current_key(Key),
recorded(Key, Value, Reference)
- recorded(+Key,
-Value)
- Equivalent to
recorded(Key, Value, _).
- erase(+Reference)
- Erase a record or clause from the database. Reference is a
db-reference returned by recorda/3, recordz/3
or recorded/3, clause/3,
assert/2, asserta/2
or assertz/2.
Fail silently if the referenced object no longer exists. Notably, if
multiple threads attempt to erase the same clause one will succeed and
the others will fail.
- instance(+Reference,
-Term)
- Unify Term with the referenced clause or database record.
Unit clauses are represented as Head :-
true.
The predicate flag/3
is the oldest way to store global non-backtrackable data in SWI-Prolog.
Flags are global and shared by all threads. Their value is limited to
atoms, small (64-bit) integers and floating point numbers. Flags are
thread-safe. The flags described in this section must not be confused
with Prolog flags described in
section 2.12.
- get_flag(+Key,
-Value)
- True when Value is the value currently associated with Key.
If Key does not exist, a new flag with value‘0’(zero)
is created.
- set_flag(+Key,
Value)
- Set flag Key to Value. Value must be an atom,
small (64-bit) integer or float.
- flag(+Key, -Old,
+New)
- True when Old is the current value of the flag Key
and the flag has been set to New. New can be an
arithmetic expression. The update is atomic. This predicate can
be used to create a shared global counter as illustrated in the
example below.
next_id(Id) :-
flag(my_id, Id, Id+1).
Tries (also called digital tree, radix tree or
prefix tree maintain a mapping between a variant of a term (see
=@=/2) and a value. They
have been introduced in SWI-Prolog 7.3.21 as part of the implementation
of tabling. The current implementation is rather immature. In
particular, the following limitations currently apply:
- Tries are not thread-safe.
- Tries should not be modified while non-deterministic predicates such
as trie_gen/3
are running on the trie.
- Terms cannot have attributed variables.
- Terms cannot be cyclic. Possibly this will not change
because cyclic terms can only be supported after creating a canonical
form of the term.
We give the definition of these predicates for reference and
debugging tabled predicates. Future versions are likely to get a more
stable and safer implementation. The API to tries should not be
considered stable.
- trie_new(-Trie)
- Create a new trie and unify Trie with a handle to the trie.
The trie handle is a blob. Tries are subject to atom garbage
collection.
- trie_destroy(+Trie)
- Destroy Trie. This removes all nodes from the trie and causes
further access to Trie to raise an existence_error exception.
The handle itself is reclaimed by atom garbage collection.
- [semidet]is_trie(@Trie)
- True when Trie is a trie object. See also current_trie/1.
- [nondet]current_trie(-Trie)
- True if Trie is a currently existing trie. As this enumerates
and then filters all known atoms this predicate is slow and should only
be used for debugging purposes. See also is_trie/1.
- trie_insert(+Trie,
+Key)
- Insert the term Key into Trie. If Key
is already part of Trie the predicates fails
silently. This is the same as trie_insert/3,
but using a fixed reserved Value.
- trie_insert(+Trie,
+Key, +Value)
- Insert the term Key into Trie and associate it
with
Value. Value can be any term. If Key-Value
is already part of Trie, the predicates fails
silently. If Key is in Trie associated with a
different value, a
permission_error is raised.
- trie_update(+Trie,
+Key, +Value)
- As trie_insert/3,
but if Key is in Trie, its associated value is updated.
- trie_insert(+Trie,
+Term, +Value, -Handle)
- As trie_insert/3,
returning a handle to the trie node. This predicate is currently unsafe
as Handle is an integer used to encode a pointer. It was used
to implement a pure Prolog version of the
library(tabling)
library.
- trie_delete(+Trie,
+Key, ?Value)
- Delete Key from Trie if the value associated with Key
unifies with Value.
- trie_lookup(+Trie,
+Key, -Value)
- True if the term Key is in Trie and associated
with
Value.
- trie_term(+Handle,
-Term)
- True when Term is a copy of the term associated with Handle.
The result is undefined (including crashes) if Handle is not
a handle returned by trie_insert_new/3
or the node has been removed afterwards.
- [nondet]trie_gen(+Trie,
?Key)
- True when Key is a member of Trie. See also
trie_gen_compiled/2.
- [nondet]trie_gen(+Trie,
?Key, -Value)
- True when Key is associated with Value in Trie.
Backtracking retrieves all pairs. Currently scans the entire trie, even
if Key is partly known. Currently unsafe if Trie
is modified while the values are being enumerated. See also
trie_gen_compiled/3.
- [nondet]trie_gen_compiled(+Trie,
?Key)
- [nondet]trie_gen_compiled(+Trie,
?Key, -Value)
- Similar to trie_gen/3,
but uses a compiled representation of
Trie. The compiled representation is created lazily and
manipulations of the trie (insert, delete) invalidate the current
compiled representation. The compiled representation generates answers
faster and, as it runs on a snapshot of the trie, is immune to
concurrent modifications of the trie. This predicate is used to generate
answers from answer tries as used for tabled execution. See section
7.
- [nondet]trie_property(?Trie,
?Property)
- True if Trie exists with Property. Intended for
debugging and statistical purposes. Retrieving some of these properties
visit all nodes of the trie. Defined properties are
- value_count(-Count)
- Number of key-value pairs in the trie.
- node_count(-Count)
- Number of nodes in the trie.
- size(-Bytes)
- Required storage space of the trie.
- compiled_size(-Bytes)
- Required storage space for the compiled representation as used by trie_gen_compiled/2,3.
- hashed(-Count)
- Number of nodes that use a hashed index to its children.
- lookup_count(-Count)
- Number of trie_lookup/3
calls (only when compiled with
O_TRIE_STATS).
- gen_call_count(-Count)
- Number of trie_gen/3
calls (only when compiled with
O_TRIE_STATS).
- wait(-Count)
- Number of times a thread waited on this trie for another thread to
complete it (shared tabling, only when compiled with
O_TRIE_STATS).
- deadlock(-Count)
- Number of times this trie was part of a deadlock and its completion was
abandoned (shared tabling, only when compiled with
O_TRIE_STATS).
In addition, a number of additional properties are defined on
answer tries.
- invalidated(-Count)
- Number of times the trie was invalidated (incremental tabling).
- reevaluated(-Count)
- Number of times the trie was re-evaluated (incremental tabling).
- idg_affected_count(-Count)
- Number of answer tries affected by this one (incremental tabling).
- idg_dependent_count(-Count)
- Number of answer tries this one depends on (incremental tabling).
- idg_size(-Bytes)
- Number of bytes in the IDG node representation.
Traditionally,
Prolog systems used the immediate update view: new clauses
became visible to predicates backtracking over dynamic predicates
immediately, and retracted clauses became invisible immediately.
Starting with SWI-Prolog 3.3.0 we adhere to the logical update
view, where backtrackable predicates that enter the definition of a
predicate will not see any changes (either caused by assert/1
or
retract/1)
to the predicate. This view is the ISO standard, the most commonly used
and the most‘safe’.91For
example, using the immediate update view, no call to a dynamic predicate
is deterministic. Logical updates are realised by keeping
reference counts on predicates and generation information on
clauses. Each change to the database causes an increment of the
generation of the database. Each goal is tagged with the generation in
which it was started. Each clause is flagged with the generation it was
created in as well as the generation it was erased from. Only clauses
with a‘created’ ...‘erased’interval that
encloses the generation of the current goal are considered visible.
The indexing capabilities of
SWI-Prolog are described in
section 2.17.
Summarizing, SWI-Prolog creates indexes for any applicable argument,
pairs of arguments and indexes on the arguments of compound terms when
applicable. Extended JIT indexing is not widely supported among Prolog
implementations. Programs that aim at portability should consider using term_hash/2
and term_hash/4
to design their database such that indexing on constant or functor
(name/arity reference) on the first argument is sufficient. In some
cases, using the predicates below to add one or more additional columns
(arguments) to a database predicate may improve performance. The overall
design of code using these predicates is given below. Note that as term_hash/2
leaves the hash unbound if Term is not ground. This causes
the lookup to be fast if Term is ground and correct (but
slow) otherwise.
:- dynamic
x/2.
assert_x(Term) :-
term_hash(Term, Hash),
assertz(x(Hash, Term)).
x(Term) :-
term_hash(Term, Hash),
x(Hash, Term).
- [det]term_hash(+Term,
-HashKey)
- If Term is a ground term (see ground/1), HashKey
is unified with a positive integer value that may be used as a hash key
to the value. If Term is not ground, the predicate leaves HashKey
an unbound variable. Hash keys are in the range 0 ... 16,777,215,
the maximal integer that can be stored efficiently on both 32 and 64 bit
platforms.
This predicate may be used to build hash tables as well as to exploit
argument indexing to find complex terms more quickly.
The hash key does not rely on temporary information like addresses of
atoms and may be assumed constant over different invocations and
versions of SWI-Prolog.92Last
change: version 5.10.4 Hashes differ between big and little
endian machines. The term_hash/2
predicate is cycle-safe.bugAll
arguments that (indirectly) lead to a cycle have the same hash key.
- [det]term_hash(+Term,
+Depth, +Range, -HashKey)
- As term_hash/2,
but only considers Term to the specified
Depth. The top-level term has depth 1, its arguments have
depth 2, etc. That is, Depth = 0 hashes nothing; Depth
= 1 hashes atomic values or the functor and arity of a compound
term, not its arguments; Depth = 2 also indexes
the immediate arguments, etc.
HashKey is in the range [0 ...Range-1]. Range
must be in the range [1 ... 2147483647].
- [det]variant_sha1(+Term,
-SHA1)
- Compute a SHA1-hash from Term. The hash is represented as a
40-byte hexadecimal atom. Unlike term_hash/2
and friends, this predicate produces a hash key for non-ground terms.
The hash is invariant over variable-renaming (see =@=/2)
and constants over different invocations of Prolog.bugThe
hash depends on word order (big/little-endian) and the wordsize (32/64
bits).
This predicate raises an exception when trying to compute the hash on
a cyclic term or attributed term. Attributed terms are not handled
because subsumes_chk/2
is not considered well defined for attributed terms. Cyclic terms are
not supported because this would require establishing a canonical cycle.
That is, given A=[a|A] and B=[a,a|B],
A and B should produce the same hash. This is not
(yet) implemented.
This hash was developed for lookup of solutions to a goal stored in a
table. By using a cryptographic hash, heuristic algorithms can often
ignore the possibility of hash collisions and thus avoid storing the
goal term itself as well as testing using =@=/2.
- [det]variant_hash(+Term,
-HashKey)
- Similar to variant_sha1/2,
but using a non-cryptographic hash and produces an integer result like term_hash/2.
This version does deal with attributed variables, processing them as
normal variables. This hash is primarily intended to speedup finding
variant terms in a set of terms.
bugAs variant_sha1/2,
cyclic terms result in an exception.
0 
