Did you know ... Search Documentation:
pcre.pl -- Perl compatible regular expression matching for SWI-Prolog
PublicShow source

This module provides an interface to the PCRE2 (Perl Compatible Regular Expression) library. This Prolog interface provides an almost comprehensive wrapper around PCRE2 (the successor to PCRE) with as much backward compatibility to PCRE as possible, because the original implementation was for PCRE (also known as PCRE1).

Regular expressions are created from a pattern and options and represented as a SWI-Prolog blob. This implies they are subject to (atom) garbage collection. Compiled regular expressions can safely be used in multiple threads. Most predicates accept both an explicitly compiled regular expression, a pattern, or a term Pattern/Flags. The semantics of the pattern can be additionally modified by options. In the latter two cases a regular expression blob is created and stored in a cache. The cache can be cleared using re_flush/0.

See also
- `man pcre2api` or https://www.pcre.org/current/doc/html/pcre2api.html for details of the PCRE2 syntax and options.
Source re_match(+Regex, +String) is semidet
Source re_match(+Regex, +String, +Options) is semidet
Succeeds if String matches Regex. For example:
?- re_match("^needle"/i, "Needle in a haystack").

Defined Options are given below. For details, see the PCRE documentation. If an option is repeated, the first value is used and subsequent values are ignored. Unrecognized options are ignored. Unless otherwise specified, boolean options default to false.

If Regex is a text pattern (optionally with flags), then any of the Options for re_compile/3 can be used, in addition to the Options listed below. If Regex is the result of re_compile/3, then only the following execution-time Options are recognized and any others are ignored. Some options may not exist on your system, depending on the PCRE2 version and how it was built - these unsupported options are silently ignored.

  • start(From) Start at the given character index
  • anchored(Bool) If true, match only at the first position
  • bol(Bool) String is the beginning of a line (default true) - affects behavior of circumflex metacharacter (^).
  • empty(Bool) An empty string is a valid match (default true)
  • empty_atstart(Bool) An empty string at the start of the subject is a valid match (default true)
  • eol(Bool) String is the end of a line - affects behavior of dollar metacharacter ($) (default true).
  • newline(Mode) If any, recognize any Unicode newline sequence, if anycrlf, recognize CR, LF, and CRLF as newline sequences, if cr, recognize CR, if lf, recognize LF, if crlf recognize CRLF as newline. The default is determined by how PCRE was built, and can be found by re_config(newline2(NewlineDefault)).
  • newline2(Mode) - synonym for newline(Mode).
  • utf_check(Bool) - see PCRE2 API documentation You should not need this because SWI-Prolog ensures that the UTF8 strings are valid, so the default is false.
  • endanchored(Bool) - see PCRE2 API documentation
  • partial_soft(Bool) - see PCRE2 API documentation
  • partial_hard(Bool) - see PCRE2 API documentation
  • dfa_restart(Bool) - see PCRE2 API documentation
  • dfa_shortest(Bool) - see PCRE2 API documentation
Regex- is the output of re_compile/3, a pattern or a term Pattern/Flags, where Pattern is an atom or string. The defined flags and their related option for re_compile/3 are below.
  • x: extended(true)
  • i: caseless(true)
  • m: multiline(true)
  • s: dotall(true)
  • a: capture_type(atom)
  • r: capture_type(range)
  • t: capture_type(term)

If Regex is the output of re_compile/3, any compile-time options in Options or Flags are ignored and only match-time options are used.

The options that are derived from flags take precedence over the options in the Options list. In the case of conflicting flags, the first one is used (e.g., ra results in capture_type(range)).

Source re_matchsub(+Regex, +String, -Sub:dict) is semidet
Source re_matchsub(+Regex, +String, -Sub:dict, +Options) is semidet
Match String against Regex. On success, Sub is a dict containing integer keys for the numbered capture group and atom keys for the named capture groups. The entire match string has the key 0. The associated value is determined by the capture_type(Type) option passed to re_compile/3, or by flags if Regex is of the form Pattern/Flags; and may be specified at the level of individual captures using a naming convention for the caption name. See re_compile/3 for details.

The example below exploits the typed groups to parse a date specification:

?- re_matchsub("(?<date> (?<year_I>(?:\\d\\d)?\\d\\d) -
                (?<month_I>\\d\\d) - (?<day_I>\\d\\d) )"/x,
               "2017-04-20", Sub, []).
Sub = re_match{0:"2017-04-20", date:"2017-04-20",
               day:20, month:4, year:2017}.
Both- compilation and execution options are processed. See re_compile/3 and re_match/3 for the set of options. In addition, some compilation options may passed as /Flags to Regex - see re_match/3 for the list of flags.
Regex- See re_match/2 for a description of this argument.
Source re_foldl(:Goal, +Regex, +String, ?V0, ?V, +Options) is semidet
Fold all matches of Regex on String. Each match is represented by a dict as specified for re_matchsub/4. V0 and V are related using a sequence of invocations of Goal as illustrated below.
call(Goal, Dict1, V0, V1),
call(Goal, Dict2, V1, V2),
call(Goal, Dictn, Vn, V).

This predicate is used to implement re_split/4 and re_replace/4. For example, we can count all matches of a Regex on String using this code:

re_match_count(Regex, String, Count) :-
    re_foldl(increment, Regex, String, 0, Count, []).

increment(_Match, V0, V1) :-
    V1 is V0+1.

After which we can query

?- re_match_count("a", "aap", X).
X = 2.

Here is an example Goal for extracting all the matches with their offsets within the string:

range_match(Dict, StringIndex-[MatchStart-Substring|List], StringIndex-List) :-
    Dict.(StringIndex.index) = MatchStart-MatchLen,
    sub_string(StringIndex.string, MatchStart, MatchLen, _, Substring).

And can be used with this query (note the capture_type(range) option, which is needed by range_match/3, and greedy(false) to invert the meaning of *?):

?- String = "{START} Mary {END} had a {START} little lamb {END}",
            "{START} *?(?<piece>.*) *?{END}",
            String, _{string:String,index:piece}-Matches, _-[],
Matches = [8-"Mary", 33-"little lamb"].
Source re_split(+Pattern, +String, -Splits:list) is det
Source re_split(+Pattern, +String, -Splits:list, +Options) is det
Split String using the regular expression Pattern. Splits is a list of strings holding alternating matches of Pattern and skipped parts of the String, starting with a skipped part. The Splits lists ends with a string of the content of String after the last match. If Pattern does not appear in String, Splits is a list holding a copy of String. This implies the number of elements in Splits is always odd. For example:
?- re_split("a+", "abaac", Splits, []).
Splits = ["","a","b","aa","c"].
?- re_split(":\\s*"/n, "Age: 33", Splits, []).
Splits = ['Age', ': ', 33].
Pattern- is the pattern text, optionally follows by /Flags. Similar to re_matchsub/4, the final output type can be controlled by a flag a (atom), s (string, default) or n (number if possible, atom otherwise).
Source re_replace(+Pattern, +With, +String, -NewString) is det
Source re_replace(+Pattern, +With, +String, -NewString, +Options) is det
Replace matches of the regular expression Pattern in String with With (possibly containing references to captured substrings).

Throws an error if With uses a name that doesn't exist in the Pattern.

Pattern- is the pattern text, optionally followed by /Flags. Flags may include g, replacing all occurences of Pattern. In addition, similar to re_matchsub/4, the final output type can be controlled by a flag a (atom) or s (string, default). The output type can also be specified by the capture_type option. Capture type suffixes can modify behavior; for example, the following will change an ISO 8601 format date (YYYY-MM-DD) to American style (m/d/y), and also remove leading zeros by using the _I suffix:
re_replace("(?<date> (?<year_I>(?:\\d\\d)?\\d\\d) -
            (?<month_I>\\d\\d) - (?<day_I>\\d\\d) )"/x,
           ISODate, AmericanDate)`
With- is the replacement text. It may reference captured substrings using \N or $Name. Both N and Name may be written as {N} and {Name} to avoid ambiguities. If a substring is named, it cannot be referenced by its number. The single chracters $ and \ can be escaped by doubling (e.g., re_replace(".","$$","abc",Replaced) results in Replaced="$bc"). (Because \ is an escape character inside strings, you need to write "\\\\" to get a single backslash.)
Options- See re_match/3 for the set of options.

The options that are derived from flags take precedence over the options in the Options list. In the case of conflicting flags, the first one is used (e.g., as results in capture_type(string)). If a capture_type is meaningless (range or term), it is ignored.

Source replace_range_regex(+Pattern, -Compiled, -All, -Type, +Options) is det[private]
Source default(?Val, +Default) is det[private]
If Val isn't instantiated, instantiate it to Default. If Val is already instantiated, succeed. Equivalent to: default( Val, Default), var(Val) => Val = Default. default(_Val, _Default) => true.
Source compile_replacement(+With, -Compiled)[private]
Compile the replacement specification into a specification that can be processed quickly. The compiled expressions are cached and may be reclaimed using re_flush/0 (which also removes compiled Regex from re_compile/3).

This "compilation" has nothing to do with PCRE pattern compilation; it's used by re_replace/5 to proces the With argument.

Source string_escape(-Codes)// is nondet[private]
Similar to dcg_basics:string(Codes) but also escapes "$" and "/"
Source re_compile(+Pattern, -Regex, +Options) is det
Compiles Pattern to a Regex blob of type regex (see blob/2). Defined Options are given below. Please consult the PCRE2 API documentation for details. If an option is repeated, the first value is used and subsequent values are ignored. Unrecognized options are ignored. Unless otherwise specified, boolean options default to false. Some options may not exist on your system, depending on the PCRE2 version and how it was built - these unsupported options are silently ignored.

The various matching predicates can take either a Regex blob or a string pattern; if they are given a string pattern, they call re_compile/3 and cache the result; so, there is little reason to use re_compile/3 directly.

  • anchored(Bool) If true, match only at the first position
  • auto_capture(Bool) Enable use of numbered capturing parentheses. (default true)
  • bsr(Mode) If anycrlf, \R only matches CR, LF or CRLF; if unicode, \R matches all Unicode line endings.
  • bsr2(Mode) - synonym for bsr(Mode).
  • caseless(Bool) If true, do caseless matching.
  • compat(With) Error - PCRE1 had compat(javascript) for JavaScript compatibility, but PCRE2 has removed that.
  • dollar_endonly(Bool) If true, $ not to match newline at end
  • dotall(Bool) If true, . matches anything including NL
  • dupnames(Bool) If true, allow duplicate names for subpatterns
  • extended(Bool) If true, ignore white space and # comments
  • firstline(Bool) If true, force matching to be before newline
  • greedy(Bool) If true, operators such as + and * are greedy unless followed by ?; if false, the operators are not greedy and ? has the opposite meaning. It can also beset by a `(?U)` within the pattern - see the PCRE2 pattern internal option setting documentation for details and note that the PCRE2 option is UNGREEDY, which is the inverse of this packages greedy options. (default true)
  • compat(With) Raises an errr - PCRE1 had compat(javascript) for JavaScript compatibility, but PCRE2 has removed that option . Consider using the alt_bsux and extra_alt_bsux options.
  • multiline(Bool) If true, ^ and $ match newlines within data
  • newline(Mode) If any, recognize any Unicode newline sequence; if anycrlf (default), recognize CR, LF, and CRLF as newline sequences; if cr, recognize CR; if lf, recognize LF; crlf recognize CRLF as newline; if nul, recognize the NULL character (0x00) as newline.
  • newline2(Mode) - synonym for newline(Mode).
  • ucp(Bool) If true, use Unicode properties for \d, \w, etc.
  • utf_check(Bool) - see PCRE2 API documentation You should not need this because SWI-Prolog ensures that the UTF8 strings are valid,
  • endanchored(boolean) - see PCRE2 API documentation
  • allow_empty_class(boolean) - see PCRE2 API documentation
  • alt_bsux(boolean) - see PCRE2 API documentation
  • auto_callout(boolean) - see PCRE2 API documentation
  • match_unset_backref(boolean) - see PCRE2 API documentation
  • never_ucp(boolean) - see PCRE2 API documentation
  • never_utf(boolean) - see PCRE2 API documentation
  • auto_possess(boolean) - see PCRE2 API documentation (default true)
  • dotstar_anchor(boolean) - see PCRE2 API documentation (default true)
  • start_optimize(boolean) - see PCRE2 API documentation (default true)
  • utf(boolean) - see PCRE2 API documentation
  • never_backslash_c(boolean) - see PCRE2 API documentation
  • alt_circumflex(boolean) - see PCRE2 API documentation
  • alt_verbnames(boolean) - see PCRE2 API documentation
  • use_offset_limit(boolean) - see PCRE2 API documentation
  • extended_more(boolean) - see PCRE2 API documentation
  • literal(boolean) - see PCRE2 API documentation
  • match_invalid_utf(boolean) - see PCRE2 API documentation
  • jit_complete(boolean) - see PCRE2 API documentation
  • jit_partial_soft(boolean) - see PCRE2 API documentation
  • jit_partial_hard(boolean) - see PCRE2 API documentation
  • jit_invalid_utf(boolean) - see PCRE2 API documentation
  • jit(boolean) - see PCRE2 API documentation (default true)
  • copy_matched_subject(boolean) - see PCRE2 API documentation

In addition to the options above that directly map to PCRE flags the following options are processed:

  • optimise(Bool) or optimize(Bool) Turns on the JIT compiler for additional optimization that greatly that speeds up the matching performance of many patterns. (Note that he meaning has changed slightly from the PCRE1 implementation
  • PCRE2 always optimises where possible; this is an additional optimisation.)
  • capture_type(+Type) How to return the matched part of the input and possibly captured groups in there. Possible values are:
    Return the captured string as a string (default).
    Return the captured string as an atom.
    Return the captured string as a pair Start-Length. Note that we use Start-Length rather than the more conventional Start-End to allow for immediate use with sub_atom/5 and sub_string/5.
    Parse the captured string as a Prolog term. This is notably practical if you capture a number.

The capture_type specifies the default for this pattern. The interface supports a different type for each named group using the syntax `(?<name_T>...)`, where T is one of S (string), A (atom), I (integer), F (float), N (number), T (term) and R (range). In the current implementation I, F and N are synonyms for T. Future versions may act different if the parsed value is not of the requested numeric type.

Note that re_compile/3 does not support the Pattern/Flags form that is supported by re_match/3, re_replace/4, etc.; the Pattern must be text and all compile options specified in Options.

Source re_compiled(+Spec, --Regex, +Options) is det[private]
Create a compiled regex from a specification. Cached compiled regular expressions can be reclaimed using re_flush/0 (which also removes "compiled" With arguments from re_replace/4 and re_replace/5).
Source re_flush
Clean pattern and replacement caches.
To be done
- Flush automatically if the cache becomes too large.
Source re_config(+Term)
Extract configuration information from the pcre library. Term is of the form Name(Value). Name is derived from the PCRE_CONFIG_* constant after removing PCRE_CONFIG_ and mapping the name to lower case, e.g. utf8, unicode_properties, etc. Value is a Prolog boolean, integer, or atom. For boolean (1 or 0) values, true or false is returned.

re_config/1 will backtrack through all the possible configuration values if its argument is a variable. If an unknown option is specified, re_config/1 fails.

Non-compatible changes between PCRE1 and PCRE2 because numeric values changed: bsr and newline have been replaced by bsr2 and newline2:

  • bsr2 - previously bsr returned 0 or 1; now returns unicode or anycrlf
  • newline2 - previously newline returned an integer, now returns cr, lf, crlf, any, anycrlf, nul

Term values are as follows. Some values might not exist, depending on the version of PCRE2 and the options it was built with.

  • bsr2 The character sequences that the \R escape sequence matches by default. Replaces bsr option from PCRE1, which is not compatible.
  • compiled_widths An integer whose lower bits indicate which code unit widths were selected when PCRE2 was built. The 1-bit indicates 8-bit support, and the 2-bit and 4-bit indicate 16-bit and 32-bit support, respectively. The 1 bit should always be set because the wrapper code requires 8 bit support.
  • depthlimit
  • heaplimit
  • jit true if just-in-time compiling is available.
  • jittarget A string containing the name of the architecture for which the JIT compiler is configured. e.g., 'x86 64bit (little endian + unaligned)'.
  • linksize
  • matchlimit
  • never_backslash_c
  • newline2 An atom whose value specifies the default character sequence that is recognized as meaning "newline" (cr, lf, crlf, any, anycrlf, nul). Replaces newline option from PCRE1, which is not compatible.
  • parenslimit
  • stackrecurse
  • unicode Always true
  • unicode_version The unicode version as an atom, e.g. '12.1.0'.
  • utf8 - synonym for unicode
  • parens_limit
  • version The version information as an atom, containing the PCRE version number and release date, e.g. '10.34 2019-11-21'.

    For backwards compatibility with PCRE1, the following are accepted, but are deprecated:

    • utf8 - synonym for unicode
    • link_size - synonym for linksize
    • match_limit - synonym for matchlimit
    • parens_limit - synonym for parenslimit
    • unicode_properties - always true

    The following have been removed because they don't exist in PCRE2 and don't seem to have any meaningful use in PCRE1:

    • posix_malloc_threshold
    • match_limit_recursion

Undocumented predicates

The following predicates are exported, but not or incorrectly documented.

Source re_matchsub(Arg1, Arg2, Arg3, Arg4)
Source re_match(Arg1, Arg2, Arg3)
Source re_split(Arg1, Arg2, Arg3, Arg4)
Source re_replace(Arg1, Arg2, Arg3, Arg4, Arg5)