.. This file is part of Logtalk https://logtalk.org/ SPDX-FileCopyrightText: 1998-2024 Paulo Moura <pmoura@logtalk.org> SPDX-License-Identifier: Apache-2.0

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

.. _performance_performance:

Performance

Logtalk is implemented as a trans-compiler to Prolog. When compiling predicates, it preserves in the generated Prolog code all cases of first-argument indexing and tail-recursion. In practice, this means that if you know how to write efficient Prolog predicates, you already know the basics of how to write efficient Logtalk predicates.

The Logtalk compiler appends a single argument to the compiled form of all entity predicate clauses. This hidden argument is used to pass the :term:`execution-context <predicate execution context>` when proving a query. In the common case where a predicate makes no calls to the :ref:`execution-context predicates <context_methods>` and :ref:`message-sending control constructs <message_sending>` and is neither a meta-predicate nor a coinductive predicate, the execution-context is simply passed between goals. In this case, with most backend Prolog virtual machines, the cost of this extra argument is null or negligible. When the execution-context needs to be accessed (e.g. to fetch the value of :term:self for a :ref:control_send_to_self_1 call) there may be a small inherent overhead due to the access to the individual arguments of the compound term used to represent the execution-context.

Source code compilation modes

Source code can be compiled in optimal, normal, or debug mode, depending on the :ref:`optimize <flag_optimize>` and :ref:`debug <flag_debug>` compiler flags. Optimal mode is used when deploying an application, while normal and debug modes are used when developing an application. Compiling code in optimal mode enables several optimizations, notably the use of :term:`static binding` whenever enough information is available at compile-time. In debug mode, most optimizations are turned off, and the code is instrumented to generate :ref:`debug events <debugging_events>` that enable developer tools such as the :doc:`command-line debugger <../devtools/debugger>` and the :doc:`ports profiler <../devtools/ports_profiler>`.

Local predicate calls

Local calls to object (or category) predicates have zero overhead in terms of the number of inferences, as expected, compared with local Prolog calls.

Calls to imported or inherited predicates

Assuming the :ref:`optimize <flag_optimize>` flag is turned on and a static predicate, :ref:control_call_super_1 calls have zero overhead in terms of number of inferences.

Calls to module predicates

Local calls from an object (or category) to a module predicate have zero overhead (assuming both the module and the predicate are bound at compile-time).

Messages

Logtalk implements :term:`static binding` and :term:dynamic binding for message-sending calls. For dynamic binding, a caching mechanism is used by the runtime. It's useful to measure the performance overhead in number of logic inferences compared with plain Prolog and Prolog modules. Note that the number of logic inferences is a metric independent of the chosen backend Prolog compiler. The results for Logtalk 3.17.0 and later versions are:

• Static binding: 0
• Dynamic binding (object bound at compile-time): +1
• Dynamic binding (object bound at runtime): +2 Static binding is the common case with libraries and most application code; it requires compiling code with the :ref:`optimize <flag_optimize>` flag turned on. Dynamic binding numbers are after the first call (i.e. after the generalization of the query is cached). All numbers with the :ref:`events <flag_events>` flag set to deny (setting this flag to allow adds an overhead of +5 inferences to the results above; note that this flag can be defined on a per-object basis as needed instead of globally and thus minimizing the performance impact).

  The dynamic binding caches assume the used :term:`backend Prolog compiler` does indexing of dynamic predicates. This is a common feature of modern Prolog systems, but the actual details vary from system to system and may have an impact on dynamic binding performance.

  Note that messages to self (:ref:control_send_to_self_1 calls) and messages to an object (:ref:control_send_to_object_2 calls) from the top-level interpreter always use dynamic binding, as the object that receives the message is only known at runtime.

  Messages sent from Prolog modules may use static binding depending on the used backend Prolog compiler native support for goal-expansion. Consult the Prolog compiler documentation and adapter file notes for details.

  .. warning::

  Some Prolog systems provide a time/1 predicate that also reports the number of inferences. But the reported numbers are often misleading when the predicate is called from the top-level. Besides common top-level bookkeeping operations (e.g., keeping track of goal history or applying goal-expansion) that may influence the inference counting, the Logtalk runtime code for a (::)/2 top-level goal is necessarily different from the code generated for a (::)/2 goal from a compiled object, as it requires runtime compilation of the goal into the same low-level message-sending primitive (assuming dynamic-binding is also required for the compiled object goal).

Automatic expansion of built-in meta-predicates

The compiler always expands calls to the :ref:methods_forall_2, :ref:methods_once_1, and :ref:methods_ignore_1 meta-predicates into equivalent definitions using the negation and conditional control constructs. It also expands calls to the :ref:methods_call_N, :ref:methods_phrase_2, and :ref:methods_phrase_3 meta-predicates when the first argument is bound. These expansions are performed independently of the optimize flag value.

Inlining

When the :ref:`optimize <flag_optimize>` flag is turned on, the Logtalk compiler performs inlining of predicate calls whenever possible. This includes calls to Prolog predicates that are either built-in, foreign, or defined in a module (including user). Inlining notably allows wrapping module or foreign predicates using an object without introducing any overhead. In the specific case of the :ref:`execution-context predicates <predicates_context>`, calls are inlined independently of the optimize flag value.

Generated code simplification and optimizations

When the :ref:`optimize <flag_optimize>` flag is turned on, the Logtalk compiler simplifies and optimizes generated clauses (including those resulting from the compilation of grammar rules), by flattening conjunctions, folding left unifications (e.g. generated as a by-product of the compilation of grammar rules), and removing redundant calls to true/0.

When using :ref:`lambda expressions <predicates_lambdas>` and library meta-predicates, use the :ref:library_meta_compiler library to avoid most meta-call overheads.

Size of the generated code

The size of the intermediate Prolog code generated by the compiler is proportional to the size of the source code. Assuming that the :ref:`term-expansion mechanism <expansion_expansion>` is not used, each predicate clause in the source code is compiled into a single predicate clause. But the Logtalk compiler also generates internal tables for the defined entities, for the entity relations, and for the declared and defined predicates. These tables enable support for fundamental features such as :ref:`inheritance <inheritance_inheritance>` and :ref:`reflection <reflection_reflection>`. The size of these tables is proportional to the number of entities, entity relations, and predicate declarations and definitions. When the :ref:`source_data <flag_source_data>` is turned on (the default when developing an application), the generated code also includes additional data about the source code, such as entity and predicate positions in a source file. This data enables advanced developer tool functionality. But it is usually not required when deploying an application. Thus, turning this flag off is a common setting for minimizing an application footprint.

Circular references

Circular references, i.e. two objects sending messages to each other, are relatively costly and should be avoided if possible as they prevent using static binding for the messages sent from the first loaded object to the second object. The :ref:`logtalk_make(circular) <predicates_logtalk_make_1>` goal (or its {@} top-level abbreviation) can be used to scan for circular entity dependencies. The linter also warns by default about non-ideal file loading order (controlled by the :ref:`unknown_entities <flag_unknown_entities>` flag).

Debug mode overhead

Code compiled in debug mode runs slower, as expected, when compared with normal or optimized mode. The overhead depends on the number of debug events generated when running the application. A debug event is simply a pass on a call or unification port of the :ref:`procedure box model <debugging_box_model>`. These debug events can be intercepted by defined clauses for the :ref:`logtalk::trace_event/2 <logtalk/0::trace_event/2>` and :ref:`logtalk::debug_handler/3 <logtalk/0::debug_handler/3>` multifile predicates. With no application (such as a debugger or a port profiler) loaded defining clauses for these predicates, each goal has an overhead of four extra inferences due to the runtime checking for a definition of the hook predicates and a meta-call of the user goal. The clause head unification events result in one or more inferences per goal (depending on the number of clauses whose head unifies with the goal and backtracking). In practice, this overhead translates to code compiled in debug mode running typically ~2x to ~7x slower than code compiled in normal or optimized mode, depending on the application (the exact overhead is proportional to the number of passes on the call and unification ports; deterministic code often results in a relatively larger overhead when compared with code performing significant backtracking).

Other considerations

One aspect of performance that affects both Logtalk and Prolog code is the characteristics of the Prolog VM. The Logtalk distribution includes two examples, `bench https://github.com/LogtalkDotOrg/logtalk3/tree/master/examples/bench`_ and `benchmarks https://github.com/LogtalkDotOrg/logtalk3/tree/master/examples/benchmarks`_, to help evaluate performance with specific backend Prolog systems. A table with benchmark `results https://logtalk.org/performance.html`_ for a subset of the supported systems is also available at the Logtalk website. But note that multiple factors affect the performance of an application. The benchmark examples and their results only provide a partial assessment.